# DIY Matting and Framing on a Budget

The cheapest way to make a gallery wall look custom is to combine ready-made frames with good mats and a consistent finish. That approach keeps the look polished without paying frame-shop prices for every piece.

---

## The Big-Box Strategy: Ready-Made Frames That Don't Look It

The fastest way to build a gallery wall on a budget is to start with standard-sized frames and make them look custom through matting, finish, and presentation.

### Best Sources for Quality Ready-Made Frames

| Source | Price Range | Strengths | Watch Out For |
|--------|------------|-----------|---------------|
| **IKEA (RÖDALM, LOMVIKEN, KNOPPÄNG)** | $5–$30 | Consistent quality, clean lines, good mat included ([size and mat-opening guide](/learn/ikea-frames-gallery-wall-sizes)) | Limited finishes, everyone has them; RIBBA and HOVSTA are discontinued |
| **Target (Threshold, Room Essentials)** | $8–$30 | Wider finish variety, frequently updated styles | Quality varies by line — inspect in person |
| **Amazon (Craig Frames, ArtToFrames)** | $10–$40 | Custom sizes available, huge selection | Quality inconsistent; read reviews carefully |
| **Michaels (Studio Decor)** | $15–$50 | Best in-store selection, frequent 50%+ sales | Never buy at full price — always wait for a sale |
| **Hobby Lobby** | $10–$40 | Wide selection, weekly 50% off frames | Quality varies |

> **The Michaels rule:** Michaels runs deep sales on frames almost every week. Never pay full price. Set a phone alert for their sales or check the app before visiting.

### Making Standard Frames Look Custom

The "custom framing" look comes down to three things: **mat quality, mat width, and consistency.** A $12 IKEA frame with a well-cut mat and quality print inside looks better than a $50 frame with a flimsy mat and a low-resolution photo.

---

## The DIY Mat Move

Mats (the bordered cardboard visible between the frame and the artwork) are what separate a "framed photo" from a "gallery piece." Custom-cut mats from a frame shop cost $15–$40 each. Cutting your own costs $2–$5 per mat once you have the tool.

<figure>
  <img src="/learn/diy-mat-finished.avif" alt="A black frame with a wide white mat around a small botanical print on a wooden worktable, next to a pencil, a metal ruler, and offcuts of mat board on a green cutting mat" width="1400" height="933" loading="lazy" decoding="async">
  <figcaption>A wide mat makes an inexpensive frame look like a gallery piece.</figcaption>
</figure>

### What You Need

| Item | Cost | Lasts |
|------|------|-------|
| **Mat cutter** (Logan or Dexter) | $25–$60 | Years — this is the only real investment |
| **Mat board** (pre-cut blanks or full sheets) | $2–$8 per sheet | One sheet = 1–4 mats depending on size |
| **Metal ruler** (24" or 36") | $10–$15 | Forever |
| **Self-healing cutting mat** | $15–$20 | Years |
| **Pencil + eraser** | $1 | — |

### How to Cut a Mat

1. **Measure the visible opening** you want. Standard practice: the opening should be 1/4" smaller than the artwork on all sides (so the mat overlaps the art edges slightly).
2. **Mark the back of the mat board.** Draw your cut lines in pencil on the back side.
3. **Set your mat cutter depth.** The blade should cut through the mat board but not gouge your cutting surface.
4. **Cut each side in one smooth pull.** Start and stop slightly beyond the corner marks (about 1/16") so the corners meet cleanly. This is the hardest part — practice on scrap first.
5. **Clean up corners** with a craft knife if needed. Slightly overcut corners look professional; undercut corners look torn.

<figure>
  <img src="/learn/mat-window-overlap.avif" alt="Diagram of an 11×14 frame with a white mat: the mat opening is 7½ by 9½ inches, and a dashed outline shows the 8×10 print extending a quarter inch under the mat on every side" width="1600" height="1011" loading="lazy" decoding="async">
  <figcaption>An 8×10 print in an 11×14 frame: a 7½×9½ opening lets the mat cover ¼″ of the print on every side.</figcaption>
</figure>

> **First-timer tip:** Buy two extra sheets of mat board and practice your cuts before touching the final piece. The learning curve is about 3–4 practice mats.

### Mat Width Guidelines

| Frame Size | Recommended Mat Width | Visual Effect |
|------------|----------------------|---------------|
| 5x7 | 1.5–2" | Proportional, standard gallery look |
| 8x10 | 2–2.5" | Classic presentation |
| 11x14 | 2.5–3" | Generous, upscale feel |
| 16x20 | 3–4" | Museum-quality presence |

Wider mats generally look more refined. When in doubt, go wider rather than narrower — it's one of the easiest ways to make affordable frames look expensive.

---

## Upcycling Thrift Store Frames

A good-bones frame at a thrift store costs $2–$8. With an hour of work, it can look like a $50 frame.

### What to Look For

**Buy:**
- Solid wood or real plaster frames (heavy = good)
- Ornate profiles with interesting detail
- Good structural integrity — corners tight, no warping
- Unusual sizes that add variety to your gallery

**Skip:**
- Cracked or separated corners (structural failure is hard to fix well)
- Frames with deep scratches through to bare wood (unless you're painting over it)
- Anything with mold, mildew, or persistent smell

### The Refresh Process

| Step | What to Do | Time |
|------|-----------|------|
| 1 | **Strip it down.** Remove glass, backing, mats, and any hardware. | 5 min |
| 2 | **Clean thoroughly.** Wipe with a 50/50 vinegar-water solution. Let dry completely. | 10 min |
| 3 | **Sand lightly** (if painting). 220-grit sandpaper, just enough to give the surface tooth. | 5 min |
| 4 | **Paint or finish.** Spray paint for even coverage, or brush-on chalk paint for a matte vintage look. | 15 min + dry time |
| 5 | **Replace hardware.** Swap old hangers for D-rings or sawtooth hangers. | 5 min |
| 6 | **Add new glass or acrylic** if the original is cracked or missing. | $3–$10 per piece |

### The Rub 'n Buff Trick

For ornate frames, skip the full paint job. Rub 'n Buff is a waxy metallic finish that you apply with your finger. A thin layer of "European Gold" or "Antique Gold" over an old gilded frame makes it look like a genuine antique. One tube costs about $8 and covers 4–6 frames.

### Painting for Cohesion

If you're building a gallery wall from mismatched thrift store frames, painting them all the same color is the fastest path to a unified look. The two most versatile colors:

- **Matte black** — Modern, works with any content, disappears visually so the art is the focus.
- **Soft white** — Bright, airy, works especially well with color photography and watercolors.

---

## Archival Basics: When to Spend

For everyday gallery walls with printed photos and art prints, standard materials are perfectly fine. But if you're framing anything with real value — original artwork, family heirlooms, signed prints — archival materials are worth the investment.

### When Standard Is Fine

- Printed photos from a lab or home printer
- Art prints and posters
- Anything you'd reprint if it faded

### When to Go Archival

- Original artwork (paintings, drawings, watercolors)
- Signed or limited-edition prints
- Irreplaceable family photos or documents
- Anything you'd be upset to see yellowed in 10 years

### What "Archival" Means

| Material | Standard | Archival | Price Difference |
|----------|----------|----------|-----------------|
| **Mat board** | Acid-containing, yellows over time | Acid-free, lignin-free | ~2x the cost |
| **Backing board** | Cardboard | Acid-free foam core | ~2x the cost |
| **Glass** | Standard clear | UV-filtering glass or acrylic | ~3–4x the cost |
| **Tape/adhesive** | Masking tape or glue | Acid-free linen tape | ~2x the cost |

> **The acid test:** If the existing mat is yellowed where it touches the artwork, it's acid-containing and actively damaging the piece. Replace it with acid-free mat board.

---

## Putting It All Together

Here's what a 9-frame gallery wall costs under different approaches:

| Approach | Per Frame | Total (9 frames) |
|----------|-----------|-------------------|
| **Custom frame shop** | $150–$300 | $1,350–$2,700 |
| **Ready-made + DIY mats** | $15–$35 | $135–$315 |
| **Thrift + paint + DIY mats** | $8–$20 | $72–$180 |

The quality gap between a $150 custom frame and a $30 ready-made-with-DIY-mat is real — but it's smaller than most people think, especially from normal viewing distance in a living room.

---

## Plan Your Mat Measurements

Before you cut a single mat, plan your frames in GalleryPlanner. Set custom frame dimensions including your planned mat widths to see exactly how everything fits together — and how much mat board you'll need to buy.

[Start planning your gallery wall →](/)

---

## Related Resources

- [Where to Buy Frames: A Guide for Every Budget](/learn/where-to-buy-frames)
- [The Vintage Vibe: Design with Upcycled & Thrifted Frames](/learn/vintage-upcycled-gallery-walls)
- [Print Resolution Guide for Wall Art](/learn/print-resolution-guide)
- [The Complete Guide to Gallery Walls](/learn/complete-guide-to-gallery-walls)
